[Product name] water treatment disinfectant

[Main ingredients] Chlorine dioxide, potassium hydrogen persulfate, sodium trichloroisocyanurate, sodium dichloroepidemic urate, etc.

[Properties index] white, various colored tablets, granules, powder, AB

【Applications】

Most of the algae and their excretion products can make the water body smelly, and the conventional purification process of drinking water is difficult to remove the odor produced by the algae. Because the density of the algae in the water is low, it is not easy to coagulate and precipitate in the conventional purification process of drinking water During the removal process, when a large amount of unremoved algae enters the filter tank, it often causes the filter tank to be blocked earlier, which shortens the filter tank operation cycle and increases the backwash water volume. In severe cases, the water plant may be forced to stop production. Chlorella is one of the common algae that cause filter clogging. Chlorine dioxide is a new type of water treatment disinfectant with good algae removal results.

The removal rate of chlorella increases with the increase of the initial concentration of algae, and decreases significantly with the increase of the organic content in the water. The ammonia nitrogen content has little effect on the removal of chlorella. Under acidic and alkaline conditions, the small ball The removal rate of algae decreases with the increase of pH. In the neutral to weak alkaline range, the removal rate of algae decreases slowly with the increase of pH.

Social benefits:

The use of chlorine dioxide water treatment disinfectant to sterilize drinking water does not produce tumor-causing substances such as chlorophenol, chloroform, and dioxins, preventing damage to people's health, and the social benefits are considerable.